Self backwashing filter for Cooling Tower
Self backwashing filter for Cooling Tower
A self-backwashing filter for a cooling tower is a type of filtration system that automatically cleans itself by reversing the flow of water to remove accumulated debris and impurities. It is designed to provide continuous filtration for cooling tower water systems while minimizing maintenance requirements.
Here's a general overview of how a self-backwashing filter for a cooling tower works:
Filtration: The filter is installed in the cooling tower water circuit to capture suspended solids, debris, and other impurities. It may use various filtration media such as sand, activated carbon, or special filter cartridges depending on the application.
Accumulation of contaminants: Over time, the filter media will collect particles and contaminants from the cooling tower water.
Pressure differential: As the filter media becomes clogged, it creates a pressure differential across the filter. This pressure differential is monitored by a control system.
Backwashing initiation: When the pressure differential reaches a predetermined threshold, the control system initiates the backwashing process.
Backwashing: The backwashing process involves reversing the flow of water through the filter to dislodge and flush out the accumulated contaminants. This is typically achieved by diverting a portion of the filtered water to a backwash tank or a separate backwashing chamber.
Contaminant removal: The backwashing action loosens the trapped debris and flushes it out through a drain. The filter media is thoroughly cleaned during this process.
Resuming filtration: After the backwashing cycle is complete, the filter returns to its normal filtration mode, providing clean water for the cooling tower.
Control and automation: The self-backwashing filter system is typically controlled by a programmable logic controller (PLC) or a similar control system. It monitors the pressure differential, initiates backwashing when necessary, and controls the flow of water during the filtration and backwashing cycles.
The frequency of backwashing can be adjusted based on the specific requirements of the cooling tower system and the rate of contamination accumulation. Some self-backwashing filters may also incorporate additional features such as automatic backwashing scheduling or remote monitoring capabilities for enhanced control and maintenance.
It's important to note that the specific design and operation of a self-backwashing filter can vary depending on the manufacturer and the requirements of the cooling tower system. Therefore, it is recommended to consult with the manufacturer or a qualified professional to select and install the appropriate filter for your specific cooling tower application.
 |
| basket strainer with backwash |
TOP TEC WORLD CO., LTD. we are making the world
a safer & cleaner place, with over 20 years in industrial liquid filtration
Contact Now! We have our own processing plant, R&D team and sales team.
Safe & Efficient Products. Global Shipping.
TOP TEC WORLD CO., LTD.
Tel. 02-7440761 , 097-2451473,
095-9627339
E mail : sales@toptecworld.com
www.facebook.com/strainervalves.iwako